Host Setup

The Host Setup menu displays the current values of parameters required for host communications. Most parameters on this menu are read-only. This menu can be used as follows:

Access Host Setup

  1. Select Host Setup on the Elavon Main Menu to display the following menu:

  2. Scroll down to display more items.

Available Parameters


View the IP address of the Fusebox gateway.


View the Fusebox port that communicates with Simplify.


View whether or not communications with Fusebox are encrypted. (0=No, 1=Yes)


View encryption type used for communications with Fusebox.


View/modify the TMS identifier. This is a HEM/IngEstate locator value assigned to the PIN Pad by Elavon. This value must only be changed on instructions from Elavon, using the Elavon-supplied value.