Ingenico iPP320

To configure the iPP320 card reader for IP connectivity, you will need the following items:

  • iPP Magic Box
  • Ethernet Cable
  • iPP320 Card Reader
  • iPP320 Power Cord
  • Converge Account Information

To configure the iPP320 card reader for IP connectivity, complete the following steps:

Refer to this section to configure the iPP320 card reader for USB connectivity.

Connect the Card Reader Peripherals

  1. Plug the Ethernet cable into the iPP Magic Box.

  2. Plug the power adapter into the iPP Magic Box.

  3. Plug the iPP Magic Box Ethernet connector into the back of the iPP320 card reader.

  4. Push down the latch.

Configure the Card Reader to Communicate via IP

  1. Unplug then replug the power source to restart the device.

    The device will display a few different screens as it boots up.

  2. Press 2, 6, 3 and 4 when the Retail Base screen appears.

  3. Press the Green button to go to the menu settings.

    error_outline
    note

    Failing to enter the code in a timely manner will prevent access to the Telium Manager configuration application. If this should occur, repeat steps 1 - 3.

  4. Press the F button.

  5. In the main menu screen, select 3 - TDA by pressing 3 on the keypad.

    error_outline
    note

    If you accidentally select the incorrect menu item, press the Yellow (Clear) or Red (Cancel) button to return to the main menu screen.

  6. Select 0 - Configuration by pressing 0 on the keypad.

    Alternatively, you can move the selection up or down by pressing the F2 or F3 button.

  7. Press the Green (Enter) button.

  8. Select 0 - Communication by pressing 0 on the keypad.

  9. Press the Green (Enter) button.

  10. Select 0 - Select Comm. Type by pressing 0 on the keypad.

  11. Press the Green (Enter) button.

  12. Select 1 - Ethernet by pressing 1 on the keypad.

  13. Press the Green (Enter) button.

    Your now enabled your device to use IP.

Configure the IP Parameters

  1. Press the Red (Cancel) button twice to return to the Configuration menu.

  2. Select 0 - Communication by pressing 0 on the keypad.

  3. Press the Green (Enter) button.

  4. Select 2 - Ethernet Settings by pressing 2 on the keypad.

  5. Press the Green (Enter) button.

  6. Select 0 - Connection Method by pressing 0 on the keypad.

  7. Press the Green (Enter) button.

  8. Select 1 - Server by pressing 1 on the keypad.

  9. Press the Green (Enter) button.

  10. Press the Red (Cancel) button once to return to the Ethernet menu.

  11. Select 1 - DHCP by pressing 1 on the keypad.

  12. Press the Green (Enter) button.

  13. Select 0 - Auto by pressing 0 on the keypad.

  14. Press the Green (Enter) button.

  15. Press the Red (Cancel) button once to return to the Ethernet menu.

  16. Select 9 - IP Port by pressing 9 on the keypad.

  17. Press the Green (Enter) button.

  18. Determine if the IP Port is set to 12000.

    If not equal to 12000, press 1, 2, 0, 0, and 0 on the keypad.

    If you prefer a different IP port number, enter a value between 1024 and 65536.

  19. Press the Green (Enter) button.

    You now configured the IP parameters of the device.

Get the Assigned IP Address

  1. Press the Red (Cancel) button repeatedly until the Save and Reboot? screen appears.

  2. Select 1 - Yes by pressing 1 on the keypad.

  3. Press the Green (Enter) button.

  4. After the device reboots, press the Red (Cancel) button once to move to the bottom of the screen.

  5. Take note of the IP address assigned to the card reader. This is the IP address to use when initializing Commerce SDK.

    If the IP address is 0.0.0.0, check the current Ethernet port or try a different Ethernet port.

Enable SSL on the Card Reader

  1. Upon initialization, Commerce SDK will update the card reader with the required device files. HOW WILL CSDK INITIALIZE?. The card reader reboots.

  2. Unplug then replug the power source to restart the device.

    Alternatively, press and hold the Yellow and # keys.

    Several screens appear as the device boots up.

  3. Press 2, 6, 3 and 4 when the Retail Base screen appears.

  4. Press the Green button to go to the menu settings.

  5. Press the F button.

  6. In the main menu screen, select 3 - TDA by pressing 3 on the keypad.

  7. Press the Green (Enter) button.

  8. Select 0 - Configuration by pressing 0 on the keypad.

  9. Press the Green (Enter) button.

  10. Select 0 - Communication by pressing 0 on the keypad.

  11. Press the Green (Enter) button.

  12. Select 2 - Ethernet Settings by pressing 2 on the keypad.

  13. Press the Green (Enter) button.

  14. Select 11 - SSL by pressing 11 on the keypad.

  15. Press the Green (Enter) button.

  16. Select 1 - Yes by pressing 1 on the keypad.

  17. Press the Green (Enter) button.

    You now confiigured the device for SSL IP connections.

  18. Press the Red (Cancel) button repeatedly until the Save and Reboot? screen appears.

  19. Select 1 - Yes by pressing 1 on the keypad.

  20. Press the Green (Enter) button.

Configure iPP320 for USB Connectivity

  1. Unplug then replug the power source to restart the device.

  2. During the reboot process, look out for the Copyright  screen.

  3. When the Copyright  screen appears, quickly press the 2, 6, 3, 4 and the Green buttons.

    error_outline
    note

    You will need to complete this step within 2 seconds.

  4. Press the F button.

  5. In the main menu screen, select 3 - TDA by pressing 3 on the keypad.

  6. Select 0 - Configuration by pressing 0 on the keypad.

    Alternatively, you can move the selection up or down by pressing the F2 or F3 button.

  7. Press the Green (Enter) button.

  8. Select 0 - Communication by pressing 0 on the keypad.

  9. Press the Green (Enter) button.

  10. Select 3 - USB < > Serial by pressing 3 on the keypad.

  11. Press the Green (Enter) button.

  12. Press the Red (Cancel) button repeatedly until the Save and Reboot? screen appears.

  13. Select 1 - Yes by pressing 1 on the keypad.

  14. Press the Green (Enter) button.

    The device will restart so that the settings will take effect.