Lane/3000

To configure the Lane card reader for IP connectivity, you will need the following items:

  • Vbox
  • Ethernet Cable
  • Card Reader
  • Power Cord
  • Account for processing against Converge

To configure the Lane 3000 card reader for IP connectivity, complete the following steps:

For USB connectivity, refer to Configure Lane 3000 for USB Connectivity.

Configure the Card Reader to Communicate via IP

  1. Unplug then replug the power source to restart the device. The device will display a few different screens as it boots up.

  2. When the Welcome screen appears press 0,0,0,1 to go to the menu settings.

    Welcome Screen

  3. On the Admin menu, select 1-Communication type and press green keypad button

    1-Communication Type

  4. Select 2-ETHERNET and press green key pad button Your device is now enabled to use IP.

    2-Ethernet

  5. Press the Red keypad button until the Save and reboot? screen appears.

  6. Select 1-Yes and press green button.

    1-Yes

Configure the IP Parameters

  1. Once Welcome screen appears, press 0, 0, 0, 1 to go to Admin menu

    Welcome Screen

  2. Select 2-Ethernet Parameters and press green button

    2-Ethernet Parameters

  3. Select 1-IP Configuration and press green button.

    1-IP Configuration

  4. Select DHCP activation and press green button

    DHCP Activation

  5. Make sure DHCP is on and press green button.

    DHCP Activation On

  6. Press Yellow button to return to previous screen

  7. Select 2-Connection type and press green button

    2-Connection Type

  8. Select 1-Server and press green button.

    1-Server

  9. Press Yellow button to return to previous screen

  10. Select 5-Port and press green button

    5-Port

  11. Confirm port number is 12000 and press green button.

    Port 12000

Get the Assigned IP Address

  1. Press the Red (Cancel) button repeatedly until the Save and Reboot? screen appears.

    1-Yes

  2. Once Welcome screen appears press 0, 0, 0, 0 and scroll down using arrow keys to view IP address.

  3. This is the IP address to use when initializing Commerce SDK.

    IP Address

Enable SSL on the Card Reader

  1. Upon initialization, Commerce SDK will update the card reader with the required device files. HOW WILL CSDK INITIALIZE? The card reader reboots.

  2. Unplug then replug the power source to restart the device.

  3. Several screens appear as the device boots up.

  4. When the Welcome screen appears, press 0, 0, 0, 1 to go to the menu settings.

    Welcome Screen

  5. Select 2-Ethernet Parameters and press green button.

    2-Ethernet Parameters

  6. Select 6-SSL Mode and press the green button.

    6-SSL Mode

  7. Select 3-TLS v1.2 and press green button

    3-TLS v1.2

  8. Press the Red button repeatedly until the Save and Reboot? screen appears

    1-Yes

Configure Lane 3000 for USB Connectivity

  1. Unplug then replug the power source to restart the device.

  2. When the Welcome screen appears, press the 00, 01.

  3. Select 1-Communication type and press green button.

  4. Select 3-USB_CDC and press green button.

  5. Press the Red (Either on keypad or screen) button repeatedly until the Save and Reboot? screen appears.

  6. Tap Yes

The device will restart so that the settings will take effect.