iCMP

Configure Ingenico iCMP for:

USB Connectivity

1. Restart Ingenico iCMP by pushing the button on the right side of the device.

2. During the reboot process, the Copyright screen will appear.

   When the screen appears, quickly press 2, 6, 3, 4, and the Green button. Make sure to press these keypad buttons within 2 seconds. After a couple more seconds, if you did it correctly you should now see Press F for menu.

   If you do not see Press F for menu, repeat steps 1 and 2.

3. Press the F button.

4. Select the TDA option.

5. Once in the TDA menu, select the Configuration option.

6. Once on the Configuration menu, select the Communication option.

7. Once on the Communication menu, select the Select Comm option.

8. Once on the Comm. Selection menu, select the USB <> Serial option and press the Green button.

9. Press the Red button until you are presented with a screen that shows Save and reboot? Y/N.

10. Scroll to the Yes  value and press the Green button.

    The device will now restart so that the settings can take effect.

Bluetooth Connectivity

1. Restart Ingenico iCMP by pushing the button on the right side of the device.

2. During the reboot process, the Copyright screen will appear.

   When the screen appears, quickly press 2, 6, 3, 4, and the Green button. Make sure to press these keypad buttons within 2 seconds. After a couple more seconds, if you did it correctly you should now see Press F for menu.

   If you do not see Press F for menu, repeat steps 1 and 2.

3. Press the F button.

4. Select the TDA option.

5. Once in the TDA menu, select the Configuration option.

6. Once on the Configuration menu, select the Communication option.

7. Once on the Communication menu, select the Select Comm option.

8. Once on the Comm. Selection menu, select the USB <> Serial option and press the Green button.

9. Press the Red button until you are presented with a screen that shows Save and reboot? Y/N.

10. Scroll to the Yes  value and press the Green button.

    The device will now restart so that the settings can take effect.

After the reboot, you will see a screen that gives you two choices: iOS and Standard.

• If you want to connect the iCMP to an iOS device, select iOS and follow the instructions in the Pair Ingenico iCMP with an iOS Device section.
• If you want to connect the iCMP to an Android device, select Standard and follow the instructions in the Pair Ingenico iCMP with an Android Device section.
• If you want to connect the iCMP to a Windows device, select Standard and follow the instructions in the Pair Ingeico iCMP with a Windows Device.

Pair iCMP with a/an:

iOS Device

This section is a continuation of the Configure Ingenico iCMP for Bluetooth Connectivity section.

After selecting iOS, the next screen will display a blank box.

1. On the iOS device, perform the following:

   • Open Settings
   • Tap Bluetooth
   • Swipe the toggle button to switch on Bluetooth

2. On Ingenico iCMP, perform the following:

   • Confirm that the name of iOS device appears on the blank box.
   • Tap the Green button.
   • Confirm that the iOS device name and PIN appears on the screen.

3. On the iOS device, perform the following:

   • Confirm a PIN Code prompt appears.
   • Enter the Ingenico iCMP PIN.
   • Tap OK.

4. On Ingenico iCMP, confirm that the Welcome screen appears.

5. On the iOS device, tap Cancel to disregard the Install App prompt that appears.

Pairing of the iOS device and Ingenico iCMP is now complete. This will enable Commerce SDK to communicate with Ingenico iCMP through the established Bluetooth connection.

Android Device

This section is a continuation of the Configure Ingenico iCMP for Bluetooth Connectivity section.

After selecting Standard, the next screen will display a Bluetooth pairing PIN code.

1. On the Android device, perform the following:

   • Open Settings
   • Tap Bluetooth
   • Swipe the toggle button to switch on Bluetooth
   • Under Available Devices, tap iCM122 (includes some numbers in the name)
   • Enter the PIN of iCMP
   • Tap OK

2. On Ingenico iCMP, confirm that the Welcome screen appears.

3. On the Android device, confirm that Ingenico iCMP appears in the Paired Devices list.

Pairing of the Android device and Ingenico iCMP is now complete. This will enable Commerce SDK to communicate with Ingenico iCMP through the established Bluetooth connection.

Windows Device

This section is a continuation of the Configure Ingenico iCMP for Bluetooth Connectivity section.

After selecting Standard, the next screen will display a Bluetooth pairing PIN code.

Windows and Bluetooth Compatibility

There are many Windows-based laptops, tablets, and desktop systems each having varying levels of support for the Bluetooth protocol. Below is a list of a few environments in which Bluetooth communications with the iCMP device have been tested:

Pre-requisites

• If your Windows device does not have a Bluetooth adapter, you will need to purchase one. Follow the instructions that come with the adapter to install the Bluetooth drivers and other necessary files.
• Verify that Bluetooth is currently enabled on your Windows device.

Pair the Devices

1. On the Windows device, complete the following:

   • Open Control Panel and go to Devices and Printers (Windows 7 or 8) or Hardware and Sound (Windows 10).
   • Click Add a Device.
   • Click iCM122 (with additional numbers) from the devices list and click Next.
   • Enter the iCMP PIN code and click OK.

2. On Ingenico iCMP, confirm that the Welcome screen appears.

3. On the Windows device, confirm that Ingenico iCMP appears in the Devices and Printers (Windows 7 or 8) or Hardware and Sound (Windows 10) list.

   Pairing of the Windows device and Ingenico iCMP is now complete. This will enable Commerce SDK to communicate with Ingenico iCMP through the established Bluetooth connection.

   error_outline

   note

   If the Ingenico iCMP is not installed with the latest firmware version, it will not update over Bluetooth and an issue may occur. To resolve the issue, perform the following steps:

   1. On Ingenico iCMP, perform the following:

   • Go to the Welcome screen and press F four times. The Select Interface screen appears.
   • Select Unpair.
   • Select USB<>Serial CONV.
   • Press the Green button.

   2. On the Windows devices, perform the following:

   • Go to Devices and Printers (Windows 7 or 8) or Hardware and Sound (Windows 10).
   • Right-click the paired iCMP device and click Remove device.

   3. Connect the iCMP card reader with the Windows device using a USB cable.
   4. Connect to the iCMP card reader with the Windows sample application.

   The card reader installs the updates and restarts automatically.

   5. Disconnect the USB cable from the card reader.
   6. On Ingenico iCMP, perform the following;

   • Go to the Welcome screen and press F four times. The Select Interface screen appears.
   • Select Unpair.
   • Select Change Port.
   • Select Bluetooth.
   • Press the Green button.

   7. Perform the Pair the Devices steps.

• previousPayment Terminals
• nextiPP320